| The Ridge Adjusted Height (rah) is the adjustment that's needed to lower the Ridge Height in order to make the tip of the rafters meet at the corner of the ridge. If you do not adjust the height the rafter will drop in below the corner. Most times giving the impression that the rafter was cut to "short" when in fact it was not. |
©JOSEPHFUSCO.ORG
1997-2010
All written, photographic and drawn materials property of and copyrighted by josephfusco.org 1997-2010.
No materials may be used in any way without the written permission of Joseph Fusco
Book
of the Month
|
Featured
Tool!
|