| This refers to the angle at which you'd cut a sheet of plywood to fit at the corner of a hip or valley rafter. Even though a hip or valley on a regular hip roof bisects the corner into two 45° angles, the cut on the sheet of plywood is not 45°. Calculate the plywood cut angle. |
©JOSEPHFUSCO.ORG
1997-2010
All written, photographic and drawn materials property of and copyrighted by josephfusco.org 1997-2010.
No materials may be used in any way without the written permission of Joseph Fusco
Book
of the Month
|
Featured
Tool!
|